| 75W-110 Extreme Pressure Gear Oil from Amsoil.SEVERE GEAR™ Synthetic Extreme Pressure (EP) 75W-110 Lube
Formulated for the severe operating conditions of today's pick-up trucks, SUVs, heavy equipment and other hard working vehicles. | Vehicles have recently seen tremendous gains in both towing capacity, and horsepower. Horsepower has increased by as much as 93% in turbo diesels, and towing capacities have increased from 7,500 to 18,000 lbs. Causing differentials to run hotter than ever. At the same time, vehicle manufacturers have been under pressure to meet government-mandated fuel efficiency standards. The society of automotive engineers (SAE) sets viscosity parameters for gear lubes in its SAE J-306 document. Untill recently, the viscosity range for SAE 90 gear oil was extremely broad, ranging from 13.5 centistokes to less than 24 centistokes. Because correct gear lube viscosity is so crucial to proper lubrication, gear manufacturers have been concerned that the oils on the low end of the SAE 90 scale may not provide adequate protection. At 16.4 centistokes, Amsoil severe gear 75W-90 synthetic gear oil is formulated well within the SAE 90 viscosity range, and has always ensured superior viscocity protection in systems specifying an SAE 90 gear lube. In order to ensure adequate gear protection, some manufacturers including Ford recommend an SAE 140 gear lube oil. However, the use of an SAE 140 gear lube increases drag, and reduces the efficiency of the gear system resulting in decreased fuel economy. | 
Product Code: SVT | Our 75W-110 is formulated for use with limited slip clutches, and is ideal for turbo diesel pick-up trucks, and other vehicles used for towing and hauling or otherwise subject to extreme operating conditions including heavy equipment, construction vehicles, street rods, and 4X4's. It is recommended in applications specifying API GL-5 or MT-1, and MIL-PRF-2105E.
Amsoil 75W-110 joins the 75W-90, and 75W-140 severe gear synthetic gear lubes as premium grade lubricants specifically engineered for maximum performance in severe duty applications. Severe Gear synthetic gear lubes feature an exclusive blend of high viscosity, shear stable synthetic base stocks and an extra treatment of high performance additives, maintaining viscosity for long lasting protection against metal to metal contact in both hot and cold temperature extremes. The proprietary Amsoil additives form an iron sulfide barrier on gear surfaces providing the ultimate line of defense against wear, pitting, and scoring. Severe gear synthetic gear lubes help prevent thermal runaway, a phenomenon caused by a lubricant's inability to control friction and heat under high stress conditions. By controlling thermal runaway, severe gear synthetic gear lubes inhibit rapid lubricant degradation and component damage. Amsoil severe gear lubes provide extended drain intervals of 100,000 miles under normal conditions, or 50,000 miles in severe service.
Amsoil severe gear synthetic gear oils are recommended for use in differentials, manual transmissions, and other gear applications requiring any of the following specifications: API GL-5, MT-1, MIL-PRF-2105E, Dana SHAES 234, Eaton PS-037, Mack GO-J, or the differential hypoid gear lube specifications from GM, Daimler Chrysler, Ford, and all other domestic and foreign vehicle manufacturers. They may also be used in axles where API GL-4 lubricant is specified.
Specific recommendations are as follows: Severe Gear 75W-90 replaces competitors 75W-90, and 80W-90 gear lubes. It delivers the best fuel efficiency, and cold weather performance in the severe gear lineup. Severe Gear 75W-110 replaces competitors 75W-110, 75W-90, and 80W-90 gear lubricants. It delivers better viscosity protection than severe gear 75W-90, and 80W-90, and better fuel efficiency than 75W-140. Severe gear 75W-140 replaces competitors 75W-140, 80W-140, and 85W-140 gear lubes. It is recommended whenever these viscosites are required my the manufacturers. |
Your chance to save money on fuel, repairs, oil changes and vehicle replacements is right here, right now. To get your free Amsoil catalog, and information packet simply email us with your name and physical address. Indicate if you are interested in saving money with a preferred customer discount, a storefront dealership, a commercial account, or a home dealership. You should also indicate what type of vehicle, or industry you are interested in using Amsoil synthetic oil or filters for. If you prefer you may also click here for a free catalog form rather than sending email. A word on ordering online; Once you click the link to order here you will be taken to the Amsoil store front. When you select a product you will be taken to a secure server. Look for the closed lock on the bottom of your browser. The lock indicates it's safe to give out personal information including credit card information. This is true anywhere on the web. Look for the lock! Feel free to send an email with any questions you may have.
Thank you for stopping by,
Daniel Gosselin Authorized Amsoil Dealer #1190048
Located in Gloucester, Massachusetts. U.S.A. Zip code: 01930
Near Boston, Massachusetts and serving The United States and Canada
Distribution centers near you. |
|
|
