75W-90 Gear Lube from Amsoil.

Specifically Engineered for 500,000-Mile Service Life in Over-The-Road Trucks.

Product Code: FGR

Applications
AMSOIL Long Life Synthetic Gear Lubes, in the correct viscosity grades, are recommended for all domestic and foreign applications such as over-the-road trucks, light, medium and heavy duty trucks, off-road equipment, commercial vehicles, motor homes, autos, SUVs, emergency vehicles, busses, delivery/utility vehicles and tractors.

Use AMSOIL Extended Drain Synthetic Gear oils in differentials, manual transmissions or other gear applications where one or more of the following standards are specified: API GL-5 & MT-1, MIL-PRF-2105E, Dana SHAES 234 (Formerly Eaton PS-037) for 250,000 miles, Dana SHAES 256 (Formerly Eaton PS-163) for 500,000 miles, Mack GO-J & GO-J+, Meritor 0-76N (75W-90) & 0-80 (80W-140), and Navistar TMS 6816 plus hypoid gear oil specifications from all foreign and domestic manufacturers such as GM, Ford and Daimler Chrysler. Can also be used in rear axles where API Service GL-4 lubricant is recommended.

AMSOIL Long Life Synthetic Gear Lubes provide:

• High Load Gear and Bearing Protection
• Reduced Operating Temperatures
• Rust and Corrosion Protection
• Better Cold Weather Shifting
• Improved Efficiency
• Improved Seal Life

For product service life in differentials, consult your owner's manual or the Original Equipment Manufacturer (OEM) to establish the application, NORMAL or SEVERE.

	NORMAL	SEVERE
Cars, SUV, Light & Medium Duty Trucks	Drain at 100,000 miles of service or according to the owner's manual, whichever is longer	Drain at 50,000 miles of service or according to the owner's manual, whichever is longer
Heavy Duty Class, 8 Truck, Commercial Equipment	Follow the OEM drain interval (miles or hours) for synthetic oil up to 250,000 miles. Otherwise, drain at twice the OEM interval for conventional oil.	Follow the OEM drain interval (miles or hours) for synthetic oil. Otherwise, drain at twice the OEM

For product service life in non-differential applications, consult owner's manual or the OEM for either normal or severe synthetic oil service intervals. Where service intervals are unavailable, drain at twice the interval for conventional oil.

AMSOIL LONG LIFE SYNTHETIC GEAR LUBES are compatible with conventional gear oils, however mixing oils reduces the benefits and nullifies the extended service life recommendations.

AMSOIL LONG LIFE SYNTHETIC GEAR LUBES are compatible with most limited slip differentials. If limited slip differential chatter occurs, add AMSOIL Slip-Lock™ friction modifier additive.

AMSOIL LONG LIFE SYNTHETIC GEAR LUBE 75W-90 replaces competitors' 75W-90 and 80W-90 viscosity grades.

Note: AMSOIL does not support extended drain intervals where water contamination occurs. Check and service the gear oil frequently when water contamination is possible. Gear oils should be changed more frequently when operating vehicles or equipment in dusty or dirty conditions unless the gear system is properly sealed and equipped with membrane type breathers.