PRODUCT DESCRIPTION
AMSOIL TBI hydraulic oil is a premium lubricant designed to biodegrade to its natural state when subjected to sunlight, water and microbial activity. TBI has a very low toxicity level because the oil is formulated with ashless additives that do not contain heavy metals. AMSOIL TBI incorporates very high quality synthetic base oils that provide thermal stability, even though they are biodegradable. This oil also contains antiwear additives that have been thoroughly tested and qualified against stringent hydraulic oil standards including Denison HF0, HF1, HF2, Vickers M-2950-S, I286-S, and Cincinnati Milacron P-68, P-69 and P-70. TBI provides optimum protection for your hydraulics because it prevents wear of the pump and prevents rust of critical components. TBI contains antioxidants that increase the life of the oil and it contains foam inhibitors that quickly release air from the oil. TBI outperforms vegetable oil-type, biodegradable hydraulic oils because it is based on high-quality, synthetic oil chemistry that lasts longer and withstands heat better. This ensures problem-free operation. PERFORMANCE FEATURES - 80% Biodegradable Within 21 days (CEC L-33-A-94)
Thermally Stable Resists Oxidation Prevents Rust and Foam -51°F Pour Point For Cold Temperature Performance Outperforms Vegetable Type Bio-Hydraulic Oils APPLICATION RECOMMENDATION
AMSOIL TBI is recommended for gear, vane and piston stationary and mobile hydraulic systems. TBI is a multi-viscosity, SAE 5W-20 oil and is recommended for use in place of either ISO-32 or IS-46 hydraulic oils. TBI is essentially compatible with typical hydraulic oils and small amounts of contamination (lines, residue) is acceptable. However, it is recommended that systems be drained prior to installing TBI. Excessive system contamination will minimize its biodegradability effectiveness. TBI is especially well suited for applications where environmental contamination due to leaking or blown hydraulic lines presents an environmental hazard. TBI has been tested and found compatible with Nitrile (Buna-N), Poly Acrylate, Flourocarbon (Viton) and Silicone seals which are commonly found in hydraulic systems. Consult your AMSOIL sales representative or AMSOIL INC. when dealing with systems containing seals not listed. The ability of TBI to extend drain intervals and excel in performance is subject to operating conditions and maintenance practices. Monitoring by oil analysis is recommended. AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. For 275-gallon totes, please allow two to four weeks for delivery. AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on customer requests and regional demands. For applications and recommendations, contact your local AMSOIL industrial sales representative or AMSOIL INC. Typical Technical Properties | | Synthetic TBI Hydraulic Oil | TBI | | ISO VG - ASTM D-2422 | 32/46 | | SAE Grade | 5W-20 | | Viscometrics 100°C, cSt - ASTM D-445 | 7.20 | | Viscometrics 40°C, cSt - ASTM D-445 | 40.08 | | Viscosity Index (VI) - ASTM D-2270 | 144 | | Specific Gravity - ASTM D-1298 | 0.9478 | | Density - ASTM D-1298 | 7.893 | | Four-Ball Wear Test - ASTM D-4172 (40 kg, 1200 rpm, 75° C, 60 min.) | 0.41 | | Flash Point °C (°F) - ASTM D-92 | 268°C (514°F) | | Fire Point °C (°F) - ASTM D-92 | 289°C (552°F) | | Pour Point °C (°F) - ASTM D-97 | -46°C (-51°F) | | Copper Strip Corrosion Test - ASTM D-130 | 1A | | Foam - ASTM D892 Sequence I, II, III Test End | 0/0/0 | | Demulsibility - ASTM D1401 Oil/Water/Cuff (min) | 40/40/0 (10) | | Dielectric Strength, KV - ASTM D887 | 36KV | | Biodegradability % - CEC L-33-T-82 | 80 |
| 
