Thermal and Oxidative Stability
AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil eliminates the need for frequent oil changes. Outstanding thermal and oxidative stability ensures long-term physical and chemical integrity of the oil after exposure to engine operating temperatures.Low Volatility
Low volatility makes AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil highly resistant to oil consumption. The oil continues to lubricate, maintain fuel economy, and reduces exhaust emissions for an extended drain interval. Shear Stability
Superior shear stability ensures AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil maintains protective viscosity throughout extended service life. The oil continues to protect engine components from metal-to-metal contact and wear, especially in high temperatures. High Temperature Performance
AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil offers outstanding high-temperature engine protection and performance. Engines operate in optimal temperature range in high-stress conditions. In high-temperature operations, AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil provides clean, dependable lubrication and protection. Low Temperature Performance
Wax-free synthetic stocks ensure the rapid flow of motor oil throughout the engine after startup, protecting engines from wear. AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil's low temperature fluidity also helps engines start dependably year-round and significantly improves cold temperature fuel economy. Fuel Economy and Power
AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil enhances fuel economy and powerful performance. A low coefficient of friction ensures the maximum delivery of engine power with minimal frictional losses. Corrosion, Rust and Foam Control
AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil seals out rust, neutralizes acids and resists foaming. Rust inhibition is an especially important feature for engines subject to frequent short-trip operations or for stored engines. Acid neutralization protects engines from damage caused by corrosive by-products of combustion. Foam resistance ensures protection against metal-to-metal contact and wear. Additive Durability
AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil contains top-quality additives designed for long-term performance. AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil protects engines from wear, corrosion, deposit accumulation and sludge buildup. The long-life additives in AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil are designed to keep engines clean and protected for 7,500 miles or six months, whichever comes first. Meets or exceeds the following specifications for domestic and foreign gasoline engines: - API SL, SJ
- ILSAC GF-3, GF-2
- Ford WSS-M2C205A, M2C153G
- GM 4718M
- Chrysler MS 10440, MS 6395H
- ACEA A1, B1
- JASO VTW
MIXING AMSOIL
AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil is compatible with conventional petroleum oils. However, AMSOIL does not recommend using a mixture of XL-7500 oil and conventional oils for 7,500-mile or six-month drain intervals. Engine oil additives are not recommended for use with AMSOIL XL-7500 oil. SERVICE LIFE
In gasoline-fueled passenger vehicles in normal or severe service, change AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil at 7,500-mile or six-month intervals, whichever comes first. Change aftermarket or OEM full flow oil filters with every oil change. Premium quality AMSOIL Full-Flow Oil Filters are recommended for use with AMSOIL SAE 5W-30 XL-7500 Synthetic Motor Oil, and may be used for 7,500 miles or six months, whichever comes first. TYPICAL TECHNICAL PROPERTIES (Revised 4/03)
AMSOIL SAE 5W-30 XL-7500 SYNTHETIC MOTOR OIL | Kinematic Viscosity @ 100°C, cSt (ASTM D-445) | 10.3 | Kinematic Viscosity @ 40°C, cSt (ASTM D-445) | 50.9 | Viscosity Index (ASTM D-2270) | 196 | | CCS Viscosity, cP @ (°C) (ASTM D2602) | 2320 (-25) | Flash Point °C (°F) (ASTM D 92) | 234 (453) | Fire Point °C (°F) (ASTM D 92) | 250 (482) | | Pour Point °C (°F) (ASTM D 97) | -51 (-60) | Noack Volatility, % weight loss (g/100g) (DIN 51581) | 8.8 | High Temperature/High Shear Viscosity @ 150°C and 1.0 X 106 s-1, cP (ASTM D4683) | 3.1 | Four Ball Wear Test (ASTM D 4172 @ 40 kgf, 150°C, 1800 rpm, 1 hour, Scar in mm) | 0.38 | | Total Base Number (ASTM D2896) | 10.1 |
|
