| Amsoil 100:1 Premix Synthetic Two Cycle Engine Oil.Saber Professional 100:1 Premix 2-stroke oil |
Product Code: ATP 
| New AMSOIL Saber Professional (ATP) and Saber Outboard (ATO) Synthetic 2-Cycle Oils are specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Saber Outboard contains lower temperature dispersants for water-cooled outboard motors. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios of these premium synthetic formulations.- Saber Professional is "Smokeless"
- Saber Outboard is a very low smoke, low odor product
- At 100:1, both oils produce lower emissions than oils mixed at 50:1
- Saber Professional is recommended for ISO-L-EGD applications
- One mix ratio for everything eliminates confusion
- Both oils are versatile and very good for many applications
- Cost effective compared to oils mixed at 50:1 or richer
- Saber Outboard exhibits low aquatic toxicity
- Lean mix ratio prevents plug fouling and exhaust port deposit
See Article: Two-Cycle Engine Applications and Lubrication Needs If you are NOT using a multimix oil, please see this oil/gas premix chart
| Product Description
AMSOIL Saber Professional (ATP) and Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils are formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oils have excellent lubricity and cleanliness properties, controlling friction and preventing wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.Saber Professional
Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives that prevent hard carbon deposits from forming in these hot operating motors. Saber Professional is “smokeless” and delivers lower emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FC or API TC is specified. Applications
AMSOIL Saber 100:1 2-Cycle Oils are recommended for 100:1 mix ratios in normal service and 50:1 to 80:1 mix ratios in severe service applications such as commercial equipment operations and racing. TYPICAL TECHNICAL PROPERTIES
Saber Synthetic 100:1 Pre-Mix 2-Cycle Oils | | | ATP | Kinematic Viscosity @ 100°C, cSt (ASTM D-445) | 11.9 | Kinematic Viscosity @ 40°C, cSt (ASTM D-445) | 78.2 | | Viscosity Index (ASTM D-2270) | 145 | Pour Point °C (°F) (ASTM D 97) | -38 (-36) | Flash Point °C (°F) (ASTM D 92) | 101 (214) | | Fire Point °C (°F) (ASTM D 92) | 107 (225) | | DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN. |
|
Your chance to save money on fuel, repairs, oil changes and vehicle replacements is right here, right now. To get your free Amsoil catalog, and information packet simply email us with your name and physical address. Indicate if you are interested in saving money with a preferred customer discount, a storefront dealership, a commercial account, or a home dealership. You should also indicate what type of vehicle, or industry you are interested in using Amsoil synthetic oil or filters for. If you prefer you may also click here for a free catalog form rather than sending email. A word on ordering online; Once you click the link to order here you will be taken to the Amsoil store front. When you select a product you will be taken to a secure server. Look for the closed lock on the bottom of your browser. The lock indicates it's safe to give out personal information including credit card information. This is true anywhere on the web. Look for the lock! Feel free to send an email with any questions you may have.
Thank you for stopping by,
Daniel Gosselin Authorized Amsoil Dealer #1190048
Located in Gloucester, Massachusetts. U.S.A. Zip code: 01930
Near Boston, Massachusetts and serving The United States and Canada
Distribution centers near you. |
|
|
